What Is the Procedure for Manual Installation of the Netgear Wireless Router?
Want to know
the Manual Installation of the Netgear Wireless Router? If yes then read
following steps carefully. In addition, call at Netgear Router Support to get experts’ advice to install
your router efficiently and quickly.
Steps to Manual Installation of the
Netgear Wireless Router are as Follows:-
Step-1: Turn
off your PC and modem.
Step-2:
Locate the Ethernet cord that runs from your modem to your computer. Unplug the
end from your computer.
Step-3: Take
the unplugged end as well as plug it into the Ethernet, which is situated at
the port on the back of the Netgear router.
Step-4: Plug
the Ethernet cable, which comes with the router into the LAN 1 port that is on
the back of the router. Also, plug the other end into the of Ethernet port on
the
computer. The same port you unplugged the Ethernet cable using Step 2.
computer. The same port you unplugged the Ethernet cable using Step 2.
Step-5: Turn
the power on and Plug in the modem, also wait 2 minutes.
Step-6: Plug
in the router as well as wait another 2 minutes.
Step-7: Turn
on your PC as well as check the lights on the front of the router, which should
be lit.
Step-8: In
case the third light is not lit, simply check the Ethernet connection, also
make sure it is safe as well as the modem is turned on.
Step-9: If
the fourth is not lit, then simply check the Ethernet connection from the
router to the computer, also make sure the connection is safe and the PC is
turned on.
If you found
above steps tricky to follow then call at Netgear Router Phone Number and let experts handle your issue.
Comments
Post a Comment