How to Fix Brother Printer Problem “Unable to Clean 50”?
Are
you troubling by issue- “Unable to Clean 50” with your Brother printer? If yes
then no need to worry as Brother Printer Support is available for you.
Actually, this error will appear because of Mechanical malfunction or a foreign
object stuck in the machine such as a paper clip or ripped piece of paper etc.
Steps to Repair
Brother Printer Problem “Unable to Clean 50” are as Follows:-
Step-1:
Before the start, this troubleshooting process, transfer your faxes to another
fax machine if you don’t want to lose any important posts.
Step-2:
Using both hands, open the scanner cover.
Step-3:
Carefully check the left and right-hand corners as well as inside the printer
to remove any paper scraps, which may be jammed.
Step-4: Move the print head from left to right using
your hand; carefully check for any paper scraps stuck under the print head and
remove any if found.
Step-5:
Leave the scanner cover open for a few seconds and turn on the printer
Step-6: By squeezing both levers together, open the
Jam Clear Cover on the back of the machine.
Step-7: Close the Jam Clear Cover and then turn on
the machine back.
Step-8:
Gently close the scanner cover using the finger holds on each side.
- If error is still on the display, go to
9
Step-9:
Unplug the printer from the power source for one-minute, and then plug it back
in.
If
your problem remains unchanged then call on Brother Printer Phone Number to have expert’s guidance and world-class solution with ease at Mycustomerservice.
Comments
Post a Comment